| |  Pro 2039 backlight - goinghunting@hotmail.com |
| | i just bought a pro 2039 the bulb must be burn out. i order a new bulb from radio shack. my question is what steps do i take to change it.? thanks for any help. when i got the scanner it picked up celluar. great scanner. |
| |
 take 5 screws from back off. unhook where speaker plugs into you lift up board turn it over. the piece that where it shows numbers. there are two screws that holds it on bottem. unscrew the two screws one be hard get to cause there a plate. i used small
- 7/15/2005 Respond to this message
|
